Author Topic: Mountain Bike Tires  (Read 590 times)

jim-ratliff

  • 6+ Year Member
  • 1000 Posts
  • ******
  • Posts: 2739
Mountain Bike Tires
« on: April 27, 2012, 09:39:59 am »
I don't want to revive last springs discussions about tube versus tubeless, cause I've decided it's simpler for me to just stay with tubes.

However, I have settled on the Continental X-King RaceSport mtb tire in the 2.2 size at 500 grams.  Rolls as well as the other two (see below), but the carcass feels stronger and the tread is more open and seems to shed mud pretty well. Tread pattern also seems to track better through light sand and soft dirt, and the tread wraps around to the edge of the tire more, and I can feel that in turns. Even on asphalt the tread feels grippier.

And I've become a bit of a fan of Continental tires based on my 4000S road bike tires.

The other two tires I had tried last year were;
Kenda Karma - came with the bike, 455 grams, but really light-weight feeling carcass. Lynn is still riding these, but it just felt too light for my weight.
Kenda Smallblock 8, reputation for easy rolling, 520 grams, but close packed tread plugs up.
« Last Edit: April 27, 2012, 10:31:00 am by jim-ratliff »
"If you're gonna play the game boy, ya gotta learn to play it right."

Share on Facebook Share on Twitter


meput

  • 1 Year Member
  • 200 Posts
  • *
  • Posts: 205
Re: Mountain Bike Tires
« Reply #1 on: April 28, 2012, 08:02:24 am »
Hey Jim,

Thank you for highlighting the thread about tubes vs tubeless. Just went back and read it.

Took my maiden run on my new full suspension mtb. yesterday (for all of you tech hounds, a Specialized Epic comp 29'r). It came tubeless ready so I went tubeless. This was on the recommendation of both the shop guys and many mtb experienced friends. Wish me luck. Ran 29 psi front/back. No slime on the trail. Planning on 28 next ride. Stock tires: front Specialized fast trak, rear Specialized renegade control.

Now to figure out this mountain bike stuff without getting hurt . Have been avoiding it like plague over the past 10 yrs (I am too old to chance injuries especially with a fake knee, etc). So if I hurt myself  and miss any skiing next year, I will be pissed  >:(. Older mtn bike is a rigid fork/hard tail from the early 90's that was never ridden much (mostly rail trail stuff).

Did learn that there are ticks in the woods  :o. Have never gotten a tick (that I know of) in the thousand's of miles that I have logged while road biking (even spending lots of time fixing flats on the side of the road). Such is life.

midwif

  • Global Moderator
  • 1000 Posts
  • *
  • Posts: 1389
  • Location: New York City
Re: Mountain Bike Tires
« Reply #2 on: April 28, 2012, 11:50:52 am »
Out of all the wonderful info in the post, what really caught my eye was the TICK.
Latest tick removal technique please?

L.
"Play it Sam"

jim-ratliff

  • 6+ Year Member
  • 1000 Posts
  • ******
  • Posts: 2739
Re: Mountain Bike Tires
« Reply #3 on: April 28, 2012, 01:54:50 pm »
Jim: I'm sure you meant "without getting hurt too bad"?  My bike still jumps out from under me every now and then.  My only advice would be to "be aware of hitting obstacles indirectly with your front tire".  That was my bad fall, I hit a root at an angle and it deflected my front tire sideways, I continued straight.
« Last Edit: May 20, 2012, 04:06:11 pm by jim-ratliff »
"If you're gonna play the game boy, ya gotta learn to play it right."

jim-ratliff

  • 6+ Year Member
  • 1000 Posts
  • ******
  • Posts: 2739
Re: Mountain Bike Tires
« Reply #4 on: April 28, 2012, 01:58:57 pm »
Lynn-Z-Belle:
You ride way too fast for a tick to catch up.

However, if you do see one, I'm sure a loud EEEEEEEEKK would serve to scare it off. It seems to work for spiders?  :-*
"If you're gonna play the game boy, ya gotta learn to play it right."

meput

  • 1 Year Member
  • 200 Posts
  • *
  • Posts: 205
Re: Mountain Bike Tires
« Reply #5 on: April 28, 2012, 07:11:17 pm »
My bike still jumps out from under me every now and then.

I like the way you put that  ;D. Took the bike out again today. Interesting how it just wanted to "jump out from under me" twice. This is where I need to learn technique when climbing. Since I was climbing, I was not going with any speed. Just had a nice role on the ground with bruised ego. No physical damage to the bike or me. No ticks today (that I found) from rolling on the ground  ???. Interesting how the tick yesterday did not involve a splat. Managed to get it just with putting a foot down when stopping.

Dropped the tire pressure to 27 psi for both front and back. Could feel the improvement of rear traction with the lower pressure (even with the 2 splats). Will prob try ~26 next time out. That should not be for a couple days. Want to get on the road tomorrow (was planning to be on the road today but the wind was cranking at ~25 mph - wind was not so much in the woods  :D).

Lynn, best technique to remove a tick is first of all, don't get one by not stopping  :-*. Should you get one  :o, gentle traction at the head with fine forceps/tweezers. Through out the years, I have been surprised at the number of ticks I have had to remove from the eyelid area on patients. I know, TMI  :-X.

jim-ratliff

  • 6+ Year Member
  • 1000 Posts
  • ******
  • Posts: 2739
Re: Mountain Bike Tires
« Reply #6 on: April 28, 2012, 08:35:25 pm »
Climbing was my biggest challenge.  I was too used to pulling up on the handlebars; I would hit a root or something and the front wheel would pull clear off the ground.  Part of this was helped by slowing down the shock rebound speed to better match my weight and riding.
I also had to learn to get my weight much more forward and to stop pulling up.
On smoother surfaces lock out the front shock so your energy isn't wasted bouncing up and down.
« Last Edit: April 28, 2012, 08:40:30 pm by jim-ratliff »
"If you're gonna play the game boy, ya gotta learn to play it right."

Svend

  • 4-6 Year Member
  • 1000 Posts
  • ****
  • Posts: 1107
Re: Mountain Bike Tires
« Reply #7 on: April 28, 2012, 11:02:42 pm »
Another tip for control in climbing is light hands.  Keep your hands and arms relaxed and use a very light touch on the bars.  This lets the front wheel absorb the rough terrain and not throw you off balance and the wheel out of control.  It also forces you to keep your body balanced on the bike, and consequently you are less likely to flip over backwards.  Try it, and let me know how it works....

bushwacka

  • Instructor
  • 400 Posts
  • **
  • Posts: 471
Re: Mountain Bike Tires
« Reply #8 on: April 29, 2012, 05:29:55 am »
the conti's are really nice stuff, they are always sold out at the supplier level so I can never get them.

the easiest way to climb rough stuff on a FS bike with tubeless is just make sure bike is level when hitting it no lean and it will not bounce anywhere. If everything is setup the way it should be 95 percent of the hits will not even come close to jarring you. also the suspension should be open and working that why we have it right? If its to bouncy when open then get a new a bike.

meput just a word of caution lower than 30 psi is good just do not go to low and rim out you tires and bust your rim up.

meput

  • 1 Year Member
  • 200 Posts
  • *
  • Posts: 205
Re: Mountain Bike Tires
« Reply #9 on: April 29, 2012, 08:02:34 am »
Thanks everyone for the climbing advice. All of it is easy to understand, the application will be the hard part  >:(.

BW, thanks for the word of caution re: going too low in  pressure with the tubeless tires/wheels. And yes, need to get the suspension components sorted out.

I am confident that all these things will come with saddle time. But as previously alluded to, hopefully without too much physical or $$$ injury  :'(.

midwif

  • Global Moderator
  • 1000 Posts
  • *
  • Posts: 1389
  • Location: New York City
Re: Mountain Bike Tires
« Reply #10 on: April 29, 2012, 09:40:48 am »
I like the way you put that  ;D. Took the bike out again today. Interesting how it just wanted to "jump out from under me" twice. This is where I need to learn technique when climbing. Since I was climbing, I was not going with any speed. Just had a nice role on the ground with bruised ego. No physical damage to the bike or me. No ticks today (that I found) from rolling on the ground  ???. Interesting how the tick yesterday did not involve a splat. Managed to get it just with putting a foot down when stopping.

Dropped the tire pressure to 27 psi for both front and back. Could feel the improvement of rear traction with the lower pressure (even with the 2 splats). Will prob try ~26 next time out. That should not be for a couple days. Want to get on the road tomorrow (was planning to be on the road today but the wind was cranking at ~25 mph - wind was not so much in the woods  :D).

Lynn, best technique to remove a tick is first of all, don't get one by not stopping  :-*. Should you get one  :o, gentle traction at the head with fine forceps/tweezers. Through out the years, I have been surprised at the number of ticks I have had to remove from the eyelid area on patients. I know, TMI  :-X.

Jim2
Thanks for tick info. No brand new methods, tried and true still working. And no, not grossed out by the image of you pulling ticks off eyelids. Unless its MY eyelid! :o

Like Jim1 said, we both spent a goodly amount of time getting the hang of MTB's. And comparing bruises.
There was frequent "slippage" in the beginning. All of it slo-mo.

Svend, yes, thanks for the reminder about hands. That was the biggest difference initially. How you handled the front of the bike is quite different between road bikes/mountain bikes. NO PULLING UP on hills with MB's! Or an unwelcome wheelie is in store!  :'(

L.

C'mon Jim, admit it, that spider was pretty substantial looking. Like maybe a teenage brown spider. Not one of those
wuss house spiders. Those I relocate outside.  :-*
"Play it Sam"

jim-ratliff

  • 6+ Year Member
  • 1000 Posts
  • ******
  • Posts: 2739
Re: Mountain Bike Tires
« Reply #11 on: April 29, 2012, 10:19:22 am »
As you wish, Buttercup.
"If you're gonna play the game boy, ya gotta learn to play it right."

Svend

  • 4-6 Year Member
  • 1000 Posts
  • ****
  • Posts: 1107
Re: Mountain Bike Tires
« Reply #12 on: May 11, 2012, 05:57:46 pm »
Svend, yes, thanks for the reminder about hands. That was the biggest difference initially. How you handled the front of the bike is quite different between road bikes/mountain bikes. NO PULLING UP on hills with MB's! Or an unwelcome wheelie is in store!  :'(

L.

Lynn, when climbing, you want to have light hands so that the front wheel can deflect a little bit and "flex" with rough terrain -- up/down and side to side (a little bit).  If you keep your arms, wrists, shoulders rigid, then the wheel will tend to bounce off of rock/roots/ruts and you will have a tough time of it.  And tire yourself out in the process.  Relax, go with the flow, adjust steering and path as needed, but with finesse, not brute force.  And by all means keep your weight over the front.  Or put another way, keep your C-O-G vertically over the crank or slightly ahead.  No wheelies!  Fore-aft balance is key.

Despite your full suspension rig, you still have to use your body as a shock absorber and let the bike move underneath you to flow over the terrain.  Elbows, shoulders especially, but also knees and hips -- always keep 'em loose and moving to absorb bumps and depressions, etc.  Get yer butt off the seat too, when the terrain demands it -- ie. super bumpy, steep descents -- and give the rear wheel some more freedom to move up and down and smooth out the trail if needed, and get your C-O-G back when going downhill.

Have you and Jim played with the suspension settings on your forks and shocks? Rebound adjust? Air pressures? Travel adjust? I assume so, knowing Jim's attention to technical details.  But if not, this is well worth tinkering with, and can really improve your steering control on rough trails.

Hope this helps....

Svend
« Last Edit: May 11, 2012, 06:10:31 pm by Svend »

jim-ratliff

  • 6+ Year Member
  • 1000 Posts
  • ******
  • Posts: 2739
Re: Mountain Bike Tires
« Reply #13 on: May 11, 2012, 06:21:13 pm »
Yep, Jim has.


But I do have a question. There was a rubber O-ring around the rear shock. That is what you used to see how much the shock was sagging (getting compressed). The guideline was that static compression just from body weight was about 25% of the travel.  That rubber ring is gone from Lynn's bike.  Do I need to get it replaced?  Does it serve any other function, such as cleaning the piston before the dir would get dragged into the seals?
"If you're gonna play the game boy, ya gotta learn to play it right."

Svend

  • 4-6 Year Member
  • 1000 Posts
  • ****
  • Posts: 1107
Re: Mountain Bike Tires
« Reply #14 on: May 11, 2012, 06:22:14 pm »
Back to the topic of tires....I have a couple of questions for the MTB gurus here...

In some of last year's posts, I think Liam and Josh recommended using a wider tire on the front, and perhaps one with a more aggressive tread pattern.  Why is this? I don't recall ever finding out why.  Wouldn't it be best to run the same tires front and back -- same width, same tread?

And as followup to that question, should you match the tire profile shape front and rear to keep cornering and handling smooth and predictable? In other words, if the rear tire has a round profile, I would guess that putting a more square profile tire on the front would be bad for handling(?)

The reason for my question is that, while I am really liking the Slant Six's that I put on my 29er last fall (they work great in my local terrain), but about the only thing I am missing from the change-over is the more cush ride that the old Bontragers gave me.  Otherwise, they are better in every way.  So, I am thinking of swapping out the front for a wider 2.2 width, and one with larger tread lugs for a better ride.  Just wanted to check with you guys to see if this is advisable, and if so, do I keep the profile consistent with the round shape of the Slant Six?


Edit:  I am going to cross-post (re-post?) these questions into my own, older thread about tires, so as not to hijack Jim's here.

« Last Edit: May 11, 2012, 08:31:24 pm by Svend »